Tšepe e Kholo ea Matla, Pentšele ea Soldering

Tlhaloso e Khutšoanyane:

•Premium le tshebetso e phahameng.

•Ka ntlha ea chisel point, mini stand le mohele oa polasetiki.

•Mocheso le sebapi se hananang le tšusumetso.

• Keletso e akaretsang kapa ea bophelo bo bolelele ka heater ea mica.

•Likhetho tsa matla: 50W 80W 100W 150W 200W 300W

• Ka sesebelisoa sa matla se sebetsanang le ho sebetsana le ts'ebetso ho netefatsa ts'ebetso e bonolo le e sireletsehileng.

• E loketse bakeng sa mosebetsi o fapaneng oa solder, joaloka tube ea tšepe kapa likarolo tse kholo.

•Mocheso o phahameng o tlisoang ke tšepe e kholo ea matla a solder o etsa bonnete ba ho phalla hantle ha solder ho fumana ts'ebetso e ntle ea solder.

• Matla a fapaneng ho tloha ho 50W ho isa ho 300W le malebela a fapaneng a fumaneha (bophelo bo kobehileng, bo otlolohileng, bo tloaelehileng le bo bolelele)

•Setopo se khethehileng sa tšepe ZD-11H se kenyellelitsoe 150W,200W le 300W

• Sebapali se sirelelitsoeng se tiisa tšireletso e ntle mochesong le maikutlong a boiketlo

•Moqapi o kopaneng le mosebetsi o boima


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Ka ho sebelisa mokhoa o felletseng oa tsamaiso ea boleng bo holimo ea mahlale, boleng bo botle le tumelo e ntle, re fumana rekoto e ntle mme ra nka taba ena bakeng sa Matla a Maholo.Tšepe ea Soldering, Soldering Pencil, Feela bakeng sa ho fihlela lihlahisoa tsa boleng bo botle ho phethahatsa tlhoko ea bareki, thepa eohle ea rona e hlahlobiloe ka thata pele e romelloa.
Ka ho sebelisa mokhoa o felletseng oa tsamaiso ea boleng bo holimo ea mahlale, boleng bo botle le tumelo e ntle, re fumana rekoto e ntle mme ra nka taba ena bakeng saTšepe ea Solder, Pene ea Solder, Pentšele ea Solder, Tšepe ea Soldering, Melemo ea rona ke boqapi ba rona, ho tenyetseha le ho ts'epahala tse hahiloe lilemong tse 20 tse fetileng.Re tsepamisitse maikutlo ho faneng ka litšebeletso ho bareki ba rona e le ntho ea bohlokoa ho matlafatsa likamano tsa rona tsa nako e telele.Ho lula ho le teng ha lintho tsa boemo bo holimo hammoho le tšebeletso ea rona e ntle ea pele le ka mor'a thekiso ho netefatsa tlholisano e matla 'marakeng o ntseng o eketseha oa lefatše.

Likaroloana:

•Premium le tshebetso e phahameng.

•Ka ntlha ea chisel point, mini stand le mohele oa polasetiki.

•Mocheso le sebapi se hananang le tšusumetso.

• Keletso e akaretsang kapa ea bophelo bo bolelele ka heater ea mica.

•Likhetho tsa matla: 50W 80W 100W 150W 200W 300W

• Ka sesebelisoa sa matla se sebetsanang le ho sebetsana le ts'ebetso ho netefatsa ts'ebetso e bonolo le e sireletsehileng.

• E loketse bakeng sa mosebetsi o fapaneng oa solder, joaloka tube ea tšepe kapa likarolo tse kholo.

•Mocheso o phahameng o tlisoang ke tšepe e kholo ea matla a solder o etsa bonnete ba ho phalla hantle ha solder ho fumana ts'ebetso e ntle ea solder.

• Matla a fapaneng ho tloha ho 50W ho isa ho 300W le malebela a fapaneng a fumaneha (bophelo bo kobehileng, bo otlolohileng, bo tloaelehileng le bo bolelele)

•Setopo se khethehileng sa tšepe ZD-11H se kenyellelitsoe 150W,200W le 300W

• Sebapali se sirelelitsoeng se tiisa tšireletso e ntle mochesong le maikutlong a boiketlo

•Moqapi o kopaneng le mosebetsi o boima

Tlhaloso

Khoutu

Palo ea li-volts

Matla

Keletso e setseng

Keletso khoutu

Boholo ba likeletso

88-7431

110-130V

50W

B3

79-2313/79-2310

φ5.8

88-7432

220-240V

50W

B3

88-7433

110-130V

80W

B5

79-2513/79-2510

φ7.8

88-7434

220-240V

80W

B5

88-7435

110-130V

100W

B9

79-2913/79-2910

φ9.8

88-7436

220-240V

100W

B9

88-7437

110-130V

15W

W3

79-8735

Φ11.8

88-7438

220-240V

150W

W3

88-7439

110-130V

200W

W4

79-8736

Φ14

88-7440

220-240V

200W

W4

88-7441

110-130V

300W

W5

79-8737

Φ16.8

88-7442

220-240V

300W

W5

715 (1)

Tlhokomeliso

Ka lekhetlo la pele ho sebelisa tšepe ea soldering ho ka hlahisa mosi, sena ke mafura a sebelisoang ho etsa ho chesa.Ke ntho e tloaelehileng 'me e lokela ho nka metsotso e ka bang 10 feela.Ha e kotsi ho sehlahisoa kapa mosebelisi.

Tlhokomelo ea ntlha

•Kamehla ntlha e lule e koahetsoe ka thini ho netefatsa bophelo bo bolelele ba tšebeletso.•Se ke oa boloka tšepe e le mochesong o phahameng nako e telele •Le ka mohla u se ke ua hloekisa ntlha ka lisebelisoa tse mahoashe •Le ka mohla u se ke ua e pholile ka metsing.•Tlosa ntlha e 'ngoe 'me u hloekise lihora tse ling le tse ling tse mashome a mabeli tsa tšebeliso, kapa bonyane hang ka beke, 'me u tlose ntho leha e le efe e hlephileng e kentsoeng ka har'a moqomo.•Se ke oa sebelisa li-fluxes tse nang le chloride kapa acid.Sebelisa feela rosin kapa activated resin fluxes.•U se ke ua sebelisa motsoako ofe kapa ofe oa thepa e thibelang ho tšoaroa • Tšoara tšepe e futhumatsang ea solder ka tlhokomelo e feteletseng, kaha mocheso o phahameng oa tšepe o ka baka mollo kapa ho chesa habohloko.•Le ka mohla u se ke ua faela keletso e khethehileng.

Tlhokomelo

•Sesebediswa sena se lokela ho bewa sedulong sa sona ha se sa sebelisoe.• Haeba thapo ea phepelo e senyehile, e tlameha ho nkeloa sebaka ke moetsi kapa moemeli oa eona oa litšebeletso kapa motho ea nang le tsebo e tšoanang ho qoba kotsi.

Tshebetso

•1) Tlosa litšila, mafome kapa pente karolong eo u batlang ho e solder.•2)Chesa karolo ka tšepe ea solder.715 (2)•3) Kenya solder e entsoeng ka rosin karolong eo 'me u e qhibilihe ka tšepe ea soldering.• Tlhokomeliso: ha u sebelisa solder e se nang rosin-based, etsa bonnete ba hore u sebelisa motsoako oa solder karolong pele u sebelisa solder.715 (4)•4)Emela hore solder e pholile ebe e thatafatsa pele o tsamaisa karolo e solder.715 (6)

Keletso e ncha

Tlhokomeliso: Ho nchafatsa malebela kapa ho hloekisoa ho lokela ho etsoa feela ha tšepe e le mochesong oa kamore kapa ka tlase.Ka mor'a ho tlosa ntlha, tlosa lerōle leha e le lefe la oxide le ka 'nang la thehoa sebakeng sa ho boloka ntlha ea moqomo.Hlokomela ho qoba ho fumana lerole mahlong a hau.Ho lokela ho hlokomeloe hore u se ke ua tiisa ho feta tekano kaha sena se ka senya element.

Ho hloekisa ka kakaretso

Karolo e ka ntle ea tšepe kapa seteishene e ka hloekisoa ka lesela le mongobo ka ho sebelisa sesepa se metsi se senyenyane Le ka mohla u se ke ua qoelisa yuniti ka mokelikeli kapa ua lumella mokelikeli ofe kapa ofe ho kena ka tlung.Le ka mohla u se ke ua sebelisa solvent ho hloekisa mokotla.

Tlhokomediso

•Sesebelisoa ha se ntho ea ho bapala, 'me se tlameha ho bolokoa matsohong a bana.•Pele o hlwekisa sesebediswa kapa o fetola sefe, kamehla ntsha polaka ya loto ya motlakase soketeng.Ho qhaqha ntlo ha ho lumelloe.• Sesebelisoa sena ha sea rereloa ho sebelisoa ke batho (ho kenyeletsoa le bana) ba nang le matla a fokotsehileng a 'mele, kutlo kapa kelello, kapa ba hlokang boiphihlelo le tsebo, ntle le haeba ba filoe tlhokomelo kapa taelo mabapi le tšebeliso ea sesebelisoa ke motho ea ikarabellang bakeng sa polokeho ea bona. .•Bana ba lokela ho behoa leihlo ho netefatsa hore ha ba bapale ka sesebelisoa.• Haeba thapo ea phepelo e senyehile, e tlameha ho nkeloa sebaka ke moetsi, moemeli oa eona oa litšebeletso kapa batho ba nang le tsebo e tšoanang ho qoba kotsi.

Sephutheloana

Qty/Lebokose

Boholo ba Carton

NW

GW

Matla

Lebokose la Blister

50pcs

46 * 34 * 41.5cm

12kgs

13kgs

50W

50pcs

46 * 34 * 41.5cm

15kgs

17kgs

80/100W

20pcs

35*21.5*36.5cm

9kgs

10kgs

150W

20pcs

38.5 * 21.5 * 36.5cm

11kgs

12kgs

200W

20pcs

42.5 * 21.5 * 36.5cm

11kgs

12kgs

300W

Ka ho sebelisa mokhoa o felletseng oa tsamaiso ea boleng bo holimo ea mahlale, boleng bo botle le tumelo e ntle, re fumana rekoto e ntle mme ra tšoarella taba ena molemong oa Manufactur standard China Five-Axis Double-Head Desktop Automatic Welding Machine Robot Wi Th Soldering Iron for Washing Machines, Feela. bakeng sa ho fihlela lihlahisoa tsa boleng bo holimo ho phethahatsa tlhoko ea bareki, thepa eohle ea rona e hlahlobiloe ka thata pele e romelloa.
Mochini oa tšepe oa tšepe oa China Pencil Tip Soldering standard, Theko ea Mochini oa ho Soldering oa Wire, Melemo ea rona ke boqapi ba rona, ho tenyetseha le ho ts'epahala tse hahiloeng lilemong tse 20 tse fetileng.Re tsepamisitse maikutlo ho faneng ka litšebeletso ho bareki ba rona e le ntho ea bohlokoa ho matlafatsa likamano tsa rona tsa nako e telele.Ho lula ho le teng ha lintho tsa boemo bo holimo hammoho le tšebeletso ea rona e ntle ea pele le ka mor'a thekiso ho netefatsa tlholisano e matla 'marakeng o ntseng o eketseha oa lefatše.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona